Dispersion based adhesive for laying PVC design floorings, textile floorings with PVC, PUR or latex fittings on absorbent subfloors, homogeneous PVC flooring in sheets and tiles and CV flooring on all absorbent and non-absorbent subfloors.
Special Features
· Can be used as wet set or pressure sensitive adhesive
· Long open time
· Very easy clean up
· Can be used directly over WAKOL PU 280 Moisture Barrier or WAKOL MS 330 Moisture Barrier
· Up to 100% rH** (See TDS for details)
VOC content
0 g/l US regulatory
Cleaning agent
water, before adhesive cures
Climate conditions at work site
60°F / 15°C to 75°F / 24°C, 40% to 75% relative humidity
Application method
trowel notch size according to WAKOL A1 - 3/64 in. by 1/16 in. by 1/64 in. V-Notch, WAKOL A2 - 1/16 in. by 1/16 in. by 1/16 in. V-Notch, WAKOL B1 - 5/64 in. by 3/32 in. by 7/64 in. V-Notch or 3/32 in. by 3/32 in. by 3/32 in. V-Notch
Coverages
approx. 160-240 sq.ft./gal
Airing time
approx. 5-20 minutes on absorbent subfloors, approx. 30-40 minutes on non-absorbent subfloors
Curing time
light foot traffic after 3 hours / Full traffic after 24 to 72 hours (depending on climate)
