Solvent-free, water based contact adhesive for the interior installation of cork tiles on porous and non-porous subfloors and to permanently adhered, non-cushioned, clean, existing floor coverings.
Special Features
· Extra long working time
· High initial strength
· Can be walked on immediately
· Zero VOC
VOC content
0 g/l US regulatory
Cleaning agent
Water before adhesive cures
Climate conditions at work site
60°F / 15°C to 75°F / 24°C, 40% to 75% relative humidity
Application method
Loba Micro 120 Roller
Coverages
1 gal covers 180 sq.ft. when covering both the tile and the floor
Airing time
Approx. 2-3 hours; when installing pre-coated tiles working time is reduced to 1-1.5 hours
Open time
Approx. 30-45 minutes, depending on climate conditions and absorbency of substrates, allow adhesive to dry until it is clear
Curing time
Curing takes 24 hours, light traffic allowed immediately after installation
